Sign In | Join Free | My rcep.ac.cn
B2B2C.7cha.net
Products
Search by Category
Wholesale Marketplace
Home > Appliance Paint >

Antique Hammer Epoxy Polyester Powder Coating 120 - 140mm Liquidity

Categories Epoxy Polyester Powder Coating
Brand Name: Greentech
Model Number: 5645
Certification: SGS
Place of Origin: Tianjin
MOQ: 500kg
Price: $2.6-5.8/kg
Supply Ability: 1000 tons per month
Packaging Details: 20kg/carton
Material: Epoxy polyester
Color: ral color
used: for indoor
Application Method: Electrostatic spray
Gloss: high/Low/Matt
state: powder coating
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Antique Hammer Epoxy Polyester Powder Coating 120 - 140mm Liquidity

    1. General introduction:

    Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

    2. Feature:

    1).The products are non-toxic, solvent-free and non-toxic volatile substances,
    there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.
    2).Raw material utilization is high, the highest utilization rate even more than
    99%.
    3).After being pre-coated handle, disposable construction, without primer,
    you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.
    4).Dense coating adhesion, good impact strength and toughness, high
    coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.
    5).Powder coatings storage and transport are safety and convenience.


    3. Product series:

    The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

    4. Powder physical properties:

    Proportion : 1.2-1.8 (depending on the color and gloss ) .

    Particle size distribution: 100% less than 125 microns (more than 85%
    between 60 to 90).

    Liquidity(180°C):22~35mm.

    Curing conditions:200°C,10 minutes.

    5. Average coverage:

    8-10m³/kg, the membrane is 60μm
    (calculate by 100% utilization rate of powder coating).


    6. Packing:

    Carton packaging, lined with double polyethylene bag, net weight 20 kg.

    7. Storage requirements:

    Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

    8. Health and safety:

    This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

    9. Coating performance

    Coating performance
    Test itemsInspection standardsTest indicators
    High lightGlazed/Matte/Low light
    Impact resistanceISO6272GB/T1732-199350kg/cm40kg/cm
    Cupping testISO1520GB/T9753-19888mm7mm
    The adhesion (grid method)ISO2409GB/T9286-19980
    BendingISO1519GB/T6742-19862mm3mm
    Pencil HardnessASTMD3363GB/T6739-19961H-2H
    Salt spray testISO7253GB/T1771-1991>500 hours
    Damp heat testISO6270GB/T1740-1979>1000 hours
    Heat resistance110°C/24 hours(white)Good gloss retention,E≤0.3-0.4
    Florida weathering exposureISO2810South 45 °,12monsGloss retention≥50%
    Artificial accelerated aging60°C/8hours + 50°C/4hours condensing,cycle for 500hoursGloss retention≥50% Color stability:E≤0.35
    Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
    2.The above coating performance may be lower as shiny and slightly lower.


    10. Why choose our products?

    1). We have our own factory. The good quality and the competitive is the advantage of our company.
    2). The material we choose is always good and products always come out with high quality.
    3). A trial order or sample orders are welcomed.
    4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
    5). We will do our best to service you all the time if you have the further question.

    Quality Antique Hammer Epoxy Polyester Powder Coating 120 - 140mm Liquidity for sale
    Send your message to this supplier
     
    From:
    To: Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0